Configuring Point to Point T1 on Cisco Router WIC1DSU-T1 to HWIC-4T1/E1

We originally had a point to point T1 on two 2811 routers with HWIC-2T  cards.

I have a new 3925 that has a HWIC-4T1/E1 that I'm attempting to setup for multiple point to multipoint T1cards, but am not sure how to configure the HWIC-4T1 so it can talk to the WIC1DSU-T1.

My router with the WIC1DSU-T1 shows up as S0/0/0

My router with the HWIC-4T1 shows with 4 ports as:

controller T1 0/0/0

 cablelength long 0db

controller T1 0/0/1

 cablelength long 0db

controller T1 0/0/2

 cablelength long 0db

controller T1 0/0/3

 cablelength long 0db

When I plug the original T1 cable from one of the ports on the new HWIC-4T1, the port does not comes up and I am getting errors.

When I originally plugged up the WIC1DSU-T1 to WS-X45-SUP7-E   on my 2811's, the link just came right up.  Am I missing something on the configuration of the HWIC-4T1?

Thanks.  It actually ended up being a bad cable, but I appreciate the link for the configuration page.